You must have an idea about 192.168.1.1 IP address as it is it used for many reasons like login to a router it required with username and password. In Linksys router, a private IP address 192.168.1.1 is used. Different network devices use different IP address that is private for them, but 192.168.1.1 is used in the website and also default IP address for the Linksys routers to log in.
If your device is a new one and no one change any settings, then the IP address of your device is same but if anyone changes its settings, then it might be different so to set it as 192.168.1.1, press reset button and reset or restore all original settings.
Commonly the IP address 192.168.1.1 or 192.168.0.1 are known as host addresses that use to setup anything in the router like login and find the address fields on the IP address 192.168.1.1. For it, you have to look for a tab named as browser and log in to the page which shows you after pressing it. Next set default username and password so you will get all details of login to your router. The default login and password you will get on the router box as they are written on the paper sheet and stick on the backside of a router to let the user the IP address, username, and password.
192.168.1.1 Login Page, Username, Password
Table of Contents
- 1 192.168.1.1 Login Page, Username, Password
- 2 The default username and password for general routers with IP address:
- 3 ROUTER IP ADDRESS: HOW TO FIND?
- 4 CHANGE PASSWORD OF ROUTER 192.168.1.1:
- 5 IP ADDRESS OF DIFFERENT ROUTER:
- 6 ROUTER IP ADDRESS, DEFAULT USERNAME, AND PASSWORD:
- 7 CONNECT TWO ROUTERS HAVING THE SAME IP ADDRESS:
- 8 1. Cisco router -192.168.1.1
- 9 2. D-link router login
- 10 3. A Netgear router
- 11 4. Tp-link router- IP address 192.168.1.1.
- 12 The reason behind not connecting and accessing the admin page 192.168.1.1:
When your router is set with default IP address, username and password anyone can use it so to make it secure you have to change username and password of your device. If you can’t change it, then it is easy to use by anyone, and hence it is necessary to change password and user id. Once you change it, it is known to you only so no one, other than you can use it from home or office. Now it is more secure but in case if you want to change settings to default, press a reset button.
Once you set the router password and ID, it’s time to change the internet setup on a router which is very easy once you have ISP address then you get all information about your internet connection. It will give you all needed data to set up the internet.
To setup dial-up connection, then you need a username and, password on the router. If you are beginner then for quick setup of internet connection in the router, use Wizard tool. Those who have technical knowledge about it can do it manually.
For making our Wi-Fi more secure, there are different types of settings available, and one of the primaries is changed default SSID name which generally used to ident if the name of a user. When you change it to make sure you give it a unique name so no one can able to find that it’s your Wi-Fi connection until you disclose it. Note that does not give a name of family members, pet name and common name as SSID name otherwise anyone can find it. Even one can hide SSID if their router.
The default username and password for general routers with IP address:
A developer for providing better security always updates encrypted security. The two type of Encrypted security is PSK and WPA2. In most of all device these encrypted security running. Even if you want to secure your Wi-Fi connection then enable WPA2 and PSK and stay updated with encryption setting. Note that with changing SSID name apply the new password which is hard and no one can assume. You can set a password with a combination of alphabets, number, symbols and special characters. Even you can use a software or tool that creates a unique and hard password for your Wi-Fi connection. Make sure that you set the password contains at least 11 digits. You can go for more, too.
For filtering the MAC ID for the router, Mac filtering is a significant option. With this option, one can make a list of supported devices which permitted to use Wi-Fi connection. Note that once you add MAC ID, you can remove it from a list when you want. Make the secure connection and the device with a firmware update.
ROUTER IP ADDRESS: HOW TO FIND?
If you want to configure your network or want to set up a new Router, then it required IP address so that you can access it. To change IP address log into a device and find change settings option. Some of the default IP address are 192.168.0.1, 192.168.2.1 or 10.0.0.1.
CHANGE PASSWORD OF ROUTER 192.168.1.1:
To change the password of your router follow the path given below:
Login to the router admin page >> advanced settings >> Router Admin >> Change Password > >Enter Old and New Password >>save.
IP ADDRESS OF DIFFERENT ROUTER:
You can login to your Router with their default IP address but note that each Router has its Default IP address. So here we are going to share a list of all the 192.168.1. Router IP address and default Username and password.
ROUTER IP ADDRESS, DEFAULT USERNAME, AND PASSWORD:
|Router Manufacturer||User Name||Password||IP address|
CONNECT TWO ROUTERS HAVING THE SAME IP ADDRESS:
Step 1: Connect any one of the routers to your pc with LAN cable and open web browser and go to www.192.168.1.1 or https://192.168.0.1 address.
Step 2: Enter default or your username and password to access admin page of the router.
- Next, locate network or LAN setup and alter your router’s IP address from default to 192.168.2.1 and save it.
- For Netgear router user: advanced >> setup >> LAN setup and IP address >> change IP and apply.
Step 4: Now connect both that is the routers with LAN cable and all done!
Note that all latest routers have a feature of auto setup mode that let a user configure a router, but in case they don’t want to setup manually then it automatically set up a new router for use and also find default login IP address of router with login id and password.
1. Cisco router -192.168.1.1
Step 1: First, connect Cisco router using rj45 cable to your pc or laptop.
Step 2: Power on both that is router and pc/laptop.
Step 3: Open your browser and type IP address 192.168.1.1 in the search bar and press enter.
Step 4: Next, provide default username and password from the table above and in case if you have changed it then enter that username and password.
Step 5: It will open admin page of Cisco router admin page. On this page, you can change all setting including a Wi-Fi password.
Step 1: With Ethernet cable connect the d-link router with your laptop or pc.
Step 2: Switched on your pc.
Step 3: Open your web browser and paste the any of below-given link and press enter:
Step 4: Now log in to the d-link router home page with the username and password administrator.
Step 5: For first time login click on setup>> wireless setting>> select manual or automatic.
3. A Netgear router
Step 1: Connect router of Netgear router with your computer.
Step 2: Open your web browser and in the search bar type 192.168.1.1 and press enter.
Step 3: Now provide default username and password of a router and go to go wireless settings and modify settings. For default username and password check the table given above.
Step 1: Connect the router of Tp-link with your pc with the rj45 cable.
Step 2: Open a web browser and enter 192.168.1.1 in the search bar and press enter.
Step 3: Enter default username and password in the respective space.
Step 4: Next, search for Wireless Setting and change settings if you want.
The reason behind not connecting and accessing the admin page 192.168.1.1:
- The wrong or incorrect formed IP address is used like 192.168.I.I instead of 192.168.1.1
- The IP address configured improperly
- The IP address used as link www.192.168.1.1
- The router may not reply for the damaged connection with the modem
- The Incorrect IP address used in the browser or wrong settings are set up
- The false proxy installed in the browser. So reconfigure the proxy correctly.
It is all about 192.168.1.1 Login Page, Username, Password and Wireless settings. In case if you find any trouble to configure, you can connect with us using the comment box. We love to help you. Thank you!
- How to Hide your IP Address in PC and Smartphone for Online Security?
- How to Resolve IP Address conflict?
- How to DDoS an IP and Crash a Website (3 Working Methods)
- How Does an IP System Work: The Ultimate Guide